Search

A break in an electrical circuit that prevents current from flowing. (see Short Circuit)

A high-resolution networked communication protocol for computers, synthesizers and other audio devices.

The concept of configuring a computer in such as way as to maximise its performance for certain tasks. In the context of a machine being used as a DAW, optimisation might involve disabling sub-programs that access the internet regularly or intermittently, such as email hosts, automatic program update checkers and so on. It might also include the structure of the hard drive, or the separation of program data to a system drive and audio data to a separate drive to minimise access times and maximise data throughputs.

A specific form of near-coincident microphone array devised by the Office de Radiodiffusion Télévision Française (ORTF) at Radio France, the French national broadcaster. The technique employs a pair of small-diaphragm cardioid microphones mounted with a mutual angle of 110 degrees and spaced apart by 17cm. The theoretical stereo recording angle is 96 degrees.

A circuit designed to generate a periodic electrical waveform.

The effective internal impedance (resistance which many change with signal frequency) of an electronic device. In modern audio equipment the output impedance is normally very low. Microphones are normally specified with an output impedance of 150 or 200 ohms, although some vintage designs might be as low as 30 Ohms.

Recording new material to separate tracks while auditioning and playing in synchronism with previously recorded material.

To exceed the maximum acceptable signal amplitude of an electronic or electrical circuit. Overloading a device results in a noticeable increase in distortion but this may be deemed musically beneficial and desirable, or completely unacceptable and inappropriate, depending on context and intent. Overloading an analogue device typically results in the waveform peaks becoming flattened (so tending towards a square wave) and a consequent rapid increase in odd-order harmonic distortion where the distortion products appear at higher frequencies than the source signal fundamentals, but remain musically related to them. In contrast, overloading a digital system inherently contravenes the Nyquest Theorum, since he generated harmonic distortion products generally extend far above half the sampling frequency, and so become aliased and actually appear at lower frequencies than the source fundamentals with a non-musical relationship. This is why digital overloads sound so obvous and unpleasant in comparison to analogue overloads.

A resistive circuit for reducing signal level.