Early Reflections
The initial sound reflections from walls, floors and ceilings following a sound created in an acoustically reflective environment.
To find the exact phrase, put the words in quotes or join them together with a plus sign e.g. live+recording or "live recording".
To find, say, all live recording articles that mention Avid, enter: live+recording +avid - and use sidebar filters to narrow down searches further.
The initial sound reflections from walls, floors and ceilings following a sound created in an acoustically reflective environment.
The practice of trying to make each new commercial music release sound subjectively louder than any previous release, on the misguided notion that louder is more exciting and results in more sales. A relationship between the average loudness of 45rpm singles and sales was noticed in America from jukebox plays, and that led to the first loudness war. However, the advent of the CD really ramped up the situation, with music becoming ever-more dynamically compressed to squeeze the average level higher and higher towards the 0dBFS peak level. This desctructive trend is, thankfully, now being slowly reversed with the ubiquity of loudness normalisation adopted by most online audio streaming services and broadcasters.
The lower portion of the audible frequency spectrum, typically denoting frequencies below about 1kHz
The standard measurement of loudness, as used on Loudness Meters corresponding to the ITU-TR BS1770 specification. the acronym stands for 'Loudness Units (relative to) Full Scale. Earlier versions of the specification used LKFS instead, and this label remains in use in America. The K refers to the 'K-Weighting' filter used in the signal measurement process. (See this article on the loudness metering concept.)
Abbreviation for milli, meaning a multiplier of 1/1000 (one thousandth). Used as a prefix to other values to indicate magnitude, eg. 1mA = 0.001A.
Also called magnetic compensation (which is usually a more accurate description). A means of restricting the radiation range of the stray magnetic field from a drive unit’s permanent magnet which might otherwise interfere with the correct operation of moving-coil meters or CRT television monitors. While it is possible to enclose a magnet in a soft-metal case to prevent a stray magnetic field this becomes very expensive for large magnets, and so a more common approach is to affix additional small external magnets with opposite polarities to cancel out the unwanted stray field.
A device which controls slave devices. Often used to refer to synchronised recorders, or digital clocking devices.
Traditionally the sequencing of individual recordings to form a cohesive album of material, and to apply corrective equalisation and dynamics processing to ensure a consistent sound character and to optimise playback on the widest possible range of sound systems. Appropriate signal processing may also be applied to make the mastered material suitable for its intended medium (such as controlling transient peaks and dynamics and mono-ing the bass for vinyl records, etc).
A facility found mostly in live-sound mixing consoles used to create separate mixes which can be sent to many different output destinations. Essentially, a Matrix creates 'a mix of mixes' since derived from pre-mixed output signals such as subgroups, auxes or main outputs. This is in contrast to the normal console mixing facilities which are derived from input channel signals. A matrix can be any size, and is usually described in terms of numbers of inputs and outputs, such as 2x2 or 8x8, or 8x6 etc with a level control at each junction of the matrix so that the desired amount of any source can be sent to any output - and it is this feature that makes a Matrix more versatile than a conventional subgrouping system. Matrix sends might be used to create appropriate feeds for disparate destinations like PA front fills, green-room foldback, camera recorders, and so on.
The loudest sound pressure level that a device can generate or tolerate.
Megabyte. Nominally 1,000,000 (one million) bytes of data, but in fact, because computer memory works in with binary, the actual value is 1,048,576 bytes (220).
A term describing the tuning mechanism of a guitar.
Modular Digital Multitrack. An obsolete term for hardware digital recorders that can be used in multiples to provide a greater number of synchronized tracks than a single machine.
A computer's memory (RAM) used to store programs and data. This data is lost when the computer is switched off and so must be stored to disk or other suitable archive media.
A list of choices presented by a computer program or a device with a display window.
A display intended to indicate the level of a sound signal. It could indicate peak levels (eg. PPMs or digital sample meters), average levels (VU or RMS meters), or perceived loudness (LUFS meters).
The nominal signal level generated by a microphone. Typically around -50dBu. Mic level signals must be amplified to raise them to line-level.
A device used to convert an acoustic sound wave into an electrical signal.
A specialised IC at the heart of a computer which performs calculations and other data manipulations, following software instructions.
A symmetrical triangular shaped wave containing odd harmonics only, but with a lower harmonic content than the square wave.