A distortion of the natural timbre or frequency response of sound, usually but not always unwanted.

A means of arranging two or more directional microphone capsules such that they receive sound waves from all directions at exactly the same time. The varying sensitivity to sound arriving from different directions due to the directional polar patterns means that information about the directions of sound sources is captured in the form of level differences between the capsule outputs. Specific forms of coincident microphones include ‘XY’ and ‘MS’ configurations, as well as B-format and Ambisonic arrays. Coincident arrays are entirely mono-compatible because there are no timing differences between channels.

An abbreviation formed from coder-decoder, implying a 'double-ended' processing system where a signal is encoded into a specific format before transmission or recording, and then decoded on reception or replay. An example of an analogue codec might be the Dolby A or Dolby B tape noise-reduction systems, while a digital codec might be something like the FLAC data-reduction system where redundant data is removed in the coding process and fully restored in the decoding process.

Essentially an internet communications network (either a Wide Area Network [WAN] or a private network) in which a data-centre performs a range of services such as data storage (cloud storage) or remote apps and programs (cloud computing). The term comes from the way network engineers used to draw system diagrams with a cloud symbol to simplify a very complex (and irrelevant) network of routers, switches, drives and cables into something that just showed the relevant external connection points.

A mic technique which involves placing a microphone very close to a sound source, normally with the intention of maximising the wanted sound and minimising any unwanted sound from other nearby sound sources or the room acoustics. In classic music circles the technique is more often known as 'Accent Miking'.

An exact duplicate. Often refers to digital copies of digital tapes.

The process of controlling the sample rate of one digital device with an external clock signal derived from another device. In a conventional digital system there must be only one master clock device, with everything else ‘clocked’ or ‘slaved’ from that master.

When an audio signal is allowed to overload the system conveying it, clipping is said to have occurred and severe distortion results. The ‘clipping point’ is reached when the audio system can no longer accommodate the signal amplitude –either because an analogue signal voltage nears or exceeds the circuitry’s power supply voltage, or because a digital sample amplitude exceeds the quantiser’s number range. In both cases, the result is that the signal peaks are ‘clipped’ because the system can’t support the peak excursions - a sinewave source signal becomes more like a squarewave. In an analogue system clipping produces strong harmonic distortion artefacts at frequencies above the fundamental. In a digital system those high frequency harmonics cause aliasing which results in anharmonic distortion where the distortion artefacts reproduce at frequencies below the source fundamental. This is why digital clipping sounds so unlike analogue clipping, and is far more unpleasant and less musical.

An audible metronome pulse which assists musicians in playing in time.

A scale of pitches rising or falling in semitone steps.