Yamaha are geared up for an eventful NAMM Show, with not one but three new product launches planned in their pro-audio line-up. The first is the MGX Mixer series, which takes the concept behind their MG mixers and applies it to a digital console with built-in video capture/streaming options; next up is the URX interface line-up, which again comes with the option of onboard video integration; and finally, the CC1 introduces a new single-fader DAW controller equipped with a set of Stream Deck-like LCD buttons.
MGX Mixers
The new MGX Mixer line-up combines the intuitive design of the popular MG analogue mixers with the power of modern digital systems, and for the first time in Yamaha’s history, video capture and streaming capabilities. The mixers are available in 12- and 16-channel models (the MGX12 and MGX16), with each version joined by a video-equipped counterpart (the MGX12V and MGX16V) that’s capable of capturing video to a PC or Mac, and recording or streaming it together with the audio.
All four models feature mic/line combo inputs fitted with premium-quality microphone preamps that deliver an 86dB gain range and boast ultra-low distortion, along with eight line-level inputs, Bluetooth audio inputs, two XLR outputs, six or eight TRS outputs and four headphone outputs.
There are Main and Sub USB ports, the first of which allows up to 22 tracks of recording/playback with the MGX16/16V (and 18 with the MGX12/12V); the Sub USB port allows two tracks of recording/playback. All four MGX series mixers also feature up to 16 tracks of audio recording and two tracks of playback direct to/from a microSD card.
Onboard DSP powers an array of processors including a noise gate, compressor, EQ, delay, reverb, amp simulator and voice changer, as well as facilitating latency-free monitoring. Each mixer is supplied with a suite of Steinberg music production software.
The MGX series takes the concept of the MG series and applies it to a digital console.
URX Interfaces
Yamaha will be showcasing a trio of new audio interfaces at The NAMM Show 2026, all of which have been designed with an emphasis on portability and simplicity, and are aimed at musicians, producers, online gamers, influencers, live streamers, podcasters and more. Three models are available: URX22 (4-in/2-out), the URX44 (6-in/4-out) and the URX44V a 6-in/4-out interface which includes HDMI-USB video capture.
All three models feature 32-bit/192kHz support, ultra-low distortion microphone preamps and high end AD/DA converters. Alongside the main XLR/TRS combo inputs, 3.5mm stereo input and TRS outputs, the interfaces are all equipped with Main and Sub USB ports. The dual-USB arrangement allows up to 18 tracks of recording/playback via the Main port with the URX44 and URX44V — on the URX44V, video signals captured via HDMI In are also sent to the PC through this port — and 16 with the URX22, while the Sub USB port offers two tracks of recording/playback.
The URX44V’s HDMI-USB video interface incorporates the capture or transmission of high definition video and audio from cameras, gaming consoles and other HDMI output devices, and is said to be ideal for small-scale film productions, streaming, guest interviews and more. Both the URX44 and URX44V also include a microSD card slot for up to 16 tracks of audio recording and two tracks of playback, while all models feature headset in/out ports and twin headphone sockets with independent monitoring facilities.
Onboard DSP delivers latency-free monitoring and a range of creative tools including auto gain for regulating input volumes, a clip safe function designed to prevent sudden distortion and a Total FX suite which includes a ducker, noise gate, EQ and multiband compressor, along with creative effects like delay, reverb, amp simulation and a voice changer.
A touch-sensitive LCD panel and four rotary encoders provide precise, hands-on control, while a scene recall function allows simple switching between different setups or applications; products from collaborative partners Elgato and OBS Studio can also be seamlessly integrated. Each interface comes supplied with a suite of Steinberg music production software.
CC1 USB Controller
The last of Yamaha’s pre-NAMM announcements is a single-fader DAW controller that serves as a successor to Steinberg’s much-loved CC121.
The new CC1 features 12 LCD keys with unlimited banks, which can be customised through the CC1’s Yamaha Control Center application, as well as Elgato’s Stream Deck software. Four multi-function rotary controls offer hands-on access to software parameters, while the versatile ‘AI’ rotary control can adjust any parameter under the mouse pointer or at the project’s current position, as well as functioning as a jog/shuttle wheel. a dedicated DAW channel section comprises a 100mm, touch-sensitive motorised fader, solo, mute, pan, record and transport controls. It also includes a socket for a Yamaha FC5 foot pedal or FC7 expression pedal.
Pricing & Availability
All of the new releases are available now, with pricing as follows:
- MGX12: €769
- MGX12: €1049
- MGX16: €1049
- MGX16V: €1299
- URX22: €369
- URX44: €469
- URX44V: €749.
- CC1: €349
