Following on from the launch of their Mixology pedal in December 2025, ADDAC System have revealed a new Eurorack module that brings its powerful and unconventional routing and mixing capabilities to modular rigs. The ADDAC815 Mixology serves as both a dual effect chain router and feedbacker, and can also function much like a 3x3 matrix mixer, providing multiple routing configurations within a very compact set up.
The Mixology is equipped with a pair of effects loops that provide users with control over effects ordering, muting and more. Series and parallel routing options are provided, and a pair of feedback loops make it possible for each effects return to be fed back into its own (or opposing) send. There are individual routing switches for both loops, while a dedicated FX Mix knob enables crossfading between their signals. a Wet | Dry knob then allows for crossfading between the effects and the dry input signal, and a pair of dedicated Attenuverter knobs enable CV control over both FX1/FX2 and wet/dry crossfading.
ADDAC say that using the Mixology’s crossfading and feedback controls allows for some surprising and unexpected results, and that the module rewards exploration and experimentation. When used with reverb or delay, for example, the Feedback knob can be used to create seemingly infinite spatial washes from even the most basic dry signal. Users can also experiment with both parallel effects processing and live looping. The Mixology is said to be especially useful for the latter as it provides the option to record loops with or without effects, while still allowing that same chain of effects to be placed after the recorded loops.
Pricing & Availability
The ADDAC815 Mixology module is available now, priced at €160.
www.addacsystem.com/en/products/modules/addac800-series/addac815
